Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateWhy Alexandria Homeowners Choose Genie Garage Door
We provide independent Genie garage door and opener service throughout Alexandria, VA, and what sets our Genie work apart is diagnosis: we separate opener faults from door faults before anyone quotes a repair. Genie makes both door openers and the doors that hang on them, so when a Genie system misbehaves in Alexandria, the cause usually sits in one specific component – a sensor, a gear, a limit setting – not in the whole door. As an independent Genie service provider, we are not authorized, affiliated with, or endorsed by Genie, and we say so plainly. We’re a dedicated garage door company, so 100% of our work is doors and openers. Call (844) 681-5326 for a free estimate and upfront pricing agreed before any work starts.
Why Trust Alexandria Garage Door Repair Co for Your Genie Garage Door?
Our technicians have up to 14 years of experience, and Genie equipment lands on their benches regularly. We know the chain-drive and belt-drive platforms, how the Safe-T-Beam sensor pair behaves, which parts actually fail on those heads, and how Intellicode remotes and keypads pair and re-pair. That familiarity is the whole point: on a Genie unit, a technician who has seen the failure before can tell you in minutes whether you’re paying for a sensor realignment or a drive gear.
We repair, install and service Genie equipment with quality parts that fit it. Where a gear, sensor, belt or logic board is still in production we match the original part; where it isn’t, we use a quality equivalent that fits the unit and say so before installing it. Warranty-safe practice matters too. We don’t cut corners on force settings or bypass safety sensors to get a door closing, because that’s exactly the kind of shortcut that creates new problems. We handle mechanical repairs and the electronic side – openers, remotes, Wi-Fi-enabled drives – in a single visit, and the price is quoted and agreed before we start.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Common Genie Garage Door Problems We Fix in Alexandria
- Safe-T-Beam sensors misaligned or blinded by sun. Genie’s two-wire sensor setup is reliable until the beam pair drifts out of line, gets knocked, or takes low afternoon sun across one eye. The door reverses or refuses to close, the wall control flashes, and it can work fine in the morning and fail all afternoon. Realigning and testing the pair fixes the majority of these.
- Limit and force settings drifting out of adjustment. On ChainMax and ChainLift units, travel limits slowly wander, so the door stops short of the floor or reverses mid-travel. It looks like a dying opener. Usually it’s a settings problem, corrected by resetting the travel limits and running the reversal test.
- Stripped nylon drive gears and worn carriage or trolley. Older chain-drive Genie heads develop a motor that hums without lifting anything. The nylon drive gear inside the head strips, or the carriage wears to the point the chain moves and the door doesn’t. This is an opener repair, not a door replacement.
- Intellicode remotes and keypads losing pairing. After a battery change, a logic-board replacement or a power interruption, Intellicode Series II and Series III remotes and keypads can drop their pairing and stop working. We re-pair them and check whether the board or the battery is the real culprit.
- Dead backup batteries on Battery Backup models. Units with battery backup that sit unplugged or aging in a humid Alexandria garage often have a backup battery that no longer holds charge, so the opener dies in the one outage it was bought for. We test the battery and confirm the opener actually runs the door on backup.
A common Genie call is a ChainMax or SilentMax unit that runs but won’t close reliably. The door starts down, reverses, and the wall control flashes. The usual cause is a misaligned or sun-blinded Safe-T-Beam sensor, sometimes paired with a limit or force setting that has drifted. A qualified tech realigns and tests the beam pair, resets the travel limits, and confirms the reversal test before leaving. When the motor hums without moving the chain, the diagnosis usually lands on a stripped nylon drive gear or worn carriage, which is a straightforward opener repair rather than a whole-door problem.
Genie Parts & Our Repair-vs-Replace Approach
We match Genie genuine OEM gears, sensors, belts and logic boards where the part is still in production, and we use quality aftermarket equivalents only where the original is discontinued or priced out of sense. You’ll hear which we’re using and why before it goes in. On Genie heads, a gear-and-sensor repair is usually the right call. Once the logic board and the drive train are both gone on a unit over roughly 15 years, replacement is the honest recommendation, and we’ll say so even though the repair pays us more.
We don’t stock parts or claim to carry Genie equipment; we source what fits your unit. A spring is where owners most often get talked into a new door they don’t need – spring repair usually keeps the door you already have. Call (844) 681-5326 to talk through what’s failing.
| Service | Typical Estimated Cost in Alexandria |
|---|---|
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Garage Door Repair | $150 – $600 |
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
These are typical ranges, not quotes. The written estimate sets the final price. A matched pair of springs is usually replaced together, so a pair costs about twice the single-spring range. Sensors, calibration and remote programming usually sit inside the opener repair range.
Our Genie Service Process – Step by Step
- 1
Diagnosis. We test the Safe-T-Beam pair, run the door, watch the travel limits, listen to the opener head, and check whether the fault is the opener or the door. This is where we tell you if it’s a sensor, a gear, a limit or something in the door itself.
- 2
Repair or install. For a repair we match the part to your Genie unit – gear, sensor, belt, logic board – and confirm it fits before it goes on. For a new opener we mount, wire and set the travel on a unit that fits your door.
- 3
Test. We reset limits and force, run the full cycle, test the reversal on an obstruction, and re-pair Intellicode remotes and keypads so they work when we leave.
- 4
Warranty and walkthrough. We tell you what was replaced, what to watch for, and what’s covered, in plain terms.
Genie Products We Service & Install in Alexandria
We service and install Genie chain-drive openers (ChainMax and ChainLift), Genie belt-drive openers (SilentMax), Genie screw-drive and belt models (the 2024, 2035, and 2055), and Genie Intellicode remote and keypad systems in Series II and Series III. We also handle the doors those openers run – standard steel doors, wood, and custom-fit doors for Alexandria’s older garages. We repair openers, calibrate sensors, program remotes, and install new openers where a unit has run its course. Belt-drive Genie openers suit Alexandria homes where the garage sits under or beside a bedroom and you want it quiet.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
Genie isn’t the only opener we know. We service LiftMaster and Chamberlain equipment too – both the smart-home-integrated drive systems and their remotes – because a dedicated door specialist should handle whatever is already in your Alexandria garage. If your opener is a Genie, a LiftMaster or a Chamberlain, we work on it.
FAQs – Genie Garage Door Service in Alexandria
Is Alexandria Garage Door Repair Co authorized by Genie?
No. We are an independent provider, not an authorized Genie dealer or service center, and we make no claim to be. We service Genie equipment accurately and safely, and we don’t imply manufacturer authorization.
Do you use quality parts that fit Genie equipment?
Yes. We match Genie original parts where the part is still made, and use quality equivalents where it isn’t, and tell you which before installing it. We never fit a part that doesn’t belong on your unit. Call (844) 681-5326 to talk through what’s failing.
How long does Genie service take?
Most Genie opener repairs, sensor realignments and remote re-pairings take well under a visit, often an hour or two. Parts that need ordering take longer. Real timing depends on the diagnosis and the part, so call (844) 681-5326 and we’ll be straight about it.
What kinds of Genie products do you cover?
Openers, remotes and wall controls – chain, belt and screw-drive units, Intellicode remotes and keypads, sensors, and the doors those openers run. Call (844) 681-5326 to confirm your setup.
Will service void my Genie warranty?
Not if the repair is done properly with parts that fit and no safety device is bypassed. We do the work to keep your warranty intact and won’t force settings or disable sensors to get a door closing. Ask us to explain anything you don’t follow.
How much does Genie garage door cost in Alexandria?
Opener repair typically runs $120 – $320, opener installation $250 – $550, and general door repair $150 – $600; a spring runs $180 – $340 for one. These are estimates until we see the door; the written estimate sets the final price. Call (844) 681-5326 for an exact quote – estimates are free.
Book Your Genie Service in Alexandria, VA
If your Genie opener won’t close, a remote has quit, or a motor hums without lifting, call (844) 681-5326. We’ll diagnose the fault, separate the opener from the door, and quote you upfront before any work starts. Free estimates, and an emergency call when your Alexandria door can’t wait.
Alexandria’s Older Garages and Your Genie System
Alexandria isn’t a one-kind-of-garage town, and that shapes how a Genie system goes in. Old Town and Del Ray are full of early-20th-century detached frame and brick garages with low clearance, non-standard rough openings, and no modern electrical service. A plug-and-play Genie swap often won’t fit; we engineer a custom-fit door and a quiet jackshaft opener instead. Pulling a permit for structural or electrical changes triggers Old and Historic Alexandria District review, which can add weeks to the job, so we build that into the timeline. West End garages typically use standard 8-foot openings and steel doors, where a belt-drive Genie is a clean fit.
Alexandria’s humid climate leaves its mark. Hot summers and mild winters mean steel doors and hardware near the ground pick up rust, and winter road spray speeds that along. The ice storm that freezes a bottom seal to the slab can strip the bottom bracket if the door is forced. In flood-prone Old Town near the Potomac, a spring nor’easter can push water into low-lying detached garages, so we check and replace wet, swollen bottom seals and rusted bottom fixtures after storms, and often recommend flood vents or a raised threshold.
Written by the team at Alexandria Garage Door Repair Co.