Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Alexandria Homeowners
When a garage door jams halfway, snaps a spring, or refuses to close, the whole day stops with it. We fix that. Alexandria Garage Door Repair Co is a dedicated garage door specialist, not a general contractor who also hangs doors, and our technicians have up to 14 years of experience diagnosing the exact failure on your system instead of guessing at it. We handle the whole chain – opener, cables, tracks, rollers, panels, springs – so you’re not juggling three trades to get one door working. Same-day service is available in Alexandria when the door can’t wait, and you’ll get an upfront price agreed before anyone touches a tool. Call (844) 681-5326 and tell us what the door is doing.
What Our Garage Door Repair Service Includes
One company covers every mechanical and electronic piece of a residential garage door system. Here’s what each repair actually involves, and when it’s the one you need.
Panel Replacement
A single dented or cracked section doesn’t mean the whole door has to go. Panel replacement swaps out the damaged section while the rest of the door, hardware and opener stay exactly where they are. You need it when impact damage, a failed hinge pull or a bent bottom section is throwing the door off balance or letting weather in. We match the section to your door’s profile and material so the repaired door looks and travels like the original, and we tell you honestly when a panel is no longer made and a different approach makes more sense.

Spring Repair
Torsion and extension springs carry the door’s full weight, which is why spring failure is a job for a specialist and never a weekend project. You’ll know a spring has gone when you hear a loud crack from the garage, the door suddenly feels impossibly heavy, or the opener strains and stops a foot off the floor. We test both springs and the counterbalance, replace the failed spring, and check whether its partner is near the end of its life too. The high-tension hardware involved can cause serious injury if it lets go at the wrong moment, so this is one part we always recommend leaving to a trained technician.

Cable Repair
Lift cables run from the bottom corners of the door up to the drums and work alongside the springs to raise and lower it. A cable is the culprit when the door hangs crooked, the cable looks frayed or has jumped the drum, or you hear a snap and the door won’t lift at all. Cables are under the same tension as springs, so we replace them in pairs where it makes sense, inspect the drums and bottom brackets for wear, and rebalance the door afterward so it runs level.

Track Realignment
The vertical and horizontal tracks guide the door through its travel, and once they bend or pull out of the frame, the door binds, scrapes or comes off its rollers. You need realignment after a bump from a car, a loose mounting bolt, or a door that’s been forced when something was in the way. We straighten or replace the affected sections, re-anchor the track to the framing, and run the door through a full cycle to confirm it moves freely without catching.
Roller Replacement
Rollers are small, cheap parts that cause big noise and drag when they wear out. Steel rollers flatten and rumble, nylon rollers crack and shed pieces, and a seized roller will grind against the track and stress the opener. We replace worn rollers as a set, check the hinges and bearing plates at the same time, and lubricate the moving parts so the door runs quiet again.
Sensor Calibration
The safety sensors at the bottom of the tracks tell the opener to reverse if something is in the door’s path, and a misaligned or dirty sensor is one of the most common reasons a door won’t close. You need calibration when the door reverses for no reason, the opener light flashes, or the door closes partway and goes back up. We align the sensors, clean the lenses, check the wiring back to the opener, and test the reversal under load so the safety system actually works, not just the light.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Repair
We work on your brand rather than treating every door like the same generic slab. Clopay doors use specific section profiles and hinge placements, and knowing where those sections tend to crack saves us from replacing parts that don’t need it. Amarr and Wayne Dalton systems have their own spring and track setups, and we know where each one wears first. Craftsman openers bring their own quirks around limit switches and remote pairing, and we’ve learned to read those symptoms quickly instead of swapping parts on a hunch.
On the opener side we’re factory-familiar with LiftMaster and its myQ smart-home ecosystem, Chamberlain’s range, Genie drives and Raynor systems alongside the brands above. That matters most for the electronic side of a repair, where a symptom like a door that opens fine but won’t close can come from the safety sensors, the travel limits, the logic board or the wall control. Whether you have Clopay, Amarr, Wayne Dalton, Craftsman or any other make, we can help, and we’ll tell you up front if a part needs ordering before the visit.
Signs You Need Garage Door Repair Right Now
- A loud bang from the garage. That crack is usually a torsion spring letting go. The door will feel extremely heavy and the opener may not lift it at all, and forcing it risks damage to the opener and injury to anyone under it.
- The door closes partway and reverses. This is almost always a safety sensor problem, and it leaves your garage open to the street. The fix is usually quick, but until it’s done the door won’t secure the house.
- The door hangs crooked or scrapes the frame. A door that rises at an angle points to a stretched cable, a worn roller or a bent track. Left alone, the misalignment stresses the opener and can pull the door off its tracks entirely.
- The opener runs but the door doesn’t move. A stripped gear, a snapped chain or a broken torsion shaft can leave the motor spinning with nothing happening. It’s rarely the motor itself, and a proper diagnosis keeps you from paying for a new opener you don’t need.
- New noises – grinding, squealing or rattling. Doors aren’t silent, but a new grinding or squealing sound means dry bearings, a failing roller or a loose hinge. Catching it early usually means a small repair instead of a bigger one later.
Our Garage Door Repair Process – Step by Step
- 1
We listen first, then look. We ask what the door is doing, when it started and what changed right before it did. That saves time and often points straight to the failing component before we even open a toolbox.
- 2
We test the whole system, not just the broken part. We balance the door by hand to check spring tension, inspect cables and drums for wear, look at rollers and hinges, and check the opener’s force and travel settings. A door won’t fail in isolation – a snapped spring usually has a companion that’s close behind it.
- 3
We explain what we found and give you a written price. You’ll hear which part failed, why it failed and what’s safe to leave alone for now. The price is agreed before any work starts, so there’s no invoice surprise when the job is done.
- 4
We make the repair with the right parts. Springs, cables, rollers and track are replaced to spec, and we match panels and hardware to your existing door. Where a part on your system is discontinued, we tell you before we go looking for an alternative.
- 5
We run the door and test the safety systems. Before we leave, the door goes through several full cycles, the reversal is tested under load and the opener is set so the door stops and reverses the way it should. You get a walk-through and a clear picture of what to watch for next.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Alexandria?
Most garage door repair in Alexandria falls between $150 and $600, depending on which part failed and how much of the system needs attention. A typical spring repair runs $180 – $340 for one spring, and since springs are usually replaced as a matched pair, a pair costs about twice that. Cable repair is typically $130 – $250, track realignment runs $120 – $240, and roller replacement comes in around $110 – $220. Panel replacement sits at $250 – $500, opener repair at $120 – $320, and a new opener installation at $250 – $550 if your current unit is past saving. A full new door installation, when repair stops making sense, is typically $700 – $2200.
What moves the price is the part itself, how many individual springs or panels are involved, door weight and height, and whether the opener also needs work once the door is back in balance. You avoid overpaying by getting the failure diagnosed properly rather than replaced on speculation – a clicking opener with a snapped spring doesn’t need a new opener. Every estimate we give is free and written, and the price is agreed before work begins. If we open the door up and find something the estimate didn’t cover, we stop and tell you first. Call (844) 681-5326 for an exact quote on your door.
Garage Door Repair Near Alexandria – Our Service Area
We serve homeowners across Alexandria and the surrounding neighborhoods, including Huntington, Rose Hill, Belle Haven, Bailey’s Crossroads, Lincolnia, Seven Corners, Lake Barcroft and Groveton, plus Arlington just up the road. If your door fails in one of these areas, call and we’ll give you a realistic window for the visit rather than a guess. For a broader look at what we handle, see our garage door repair page, and if you’re further out toward Prince William County we work in Triangle and around garage door repair as well.
Serving Alexandria, VA – Our Local Coverage Area
We serve Alexandria and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Repair in Alexandria
Garage door repair is any fix that restores a door or opener to safe working order, including springs, cables, rollers, tracks, panels, hinges and the electronic opener and sensor systems. It’s the opposite of installation, where the whole door is replaced. Most repairs we handle in Alexandria involve one failed component and can be fixed without replacing the door.
Most repairs take one to three hours, depending on the part and how much of the system needs attention. A single spring or a sensor calibration is usually on the shorter end, while cable and track work that requires rebalancing the whole door takes longer. We’ll give you a realistic time estimate when you call, and we won’t leave until the door runs and the safety reversal is tested.
Typical garage door repair in Alexandria runs $150 – $600, with springs at $180 – $340 for one spring, cables at $130 – $250 and track realignment at $120 – $240. Panel replacement is typically $250 – $500 and opener repair $120 – $320. The written estimate sets the final price and is agreed before work starts. Call (844) 681-5326 for an exact quote – estimates are free.
Yes, we service Clopay, Amarr, Wayne Dalton and Craftsman equipment, along with LiftMaster, Chamberlain, Genie and Raynor systems. We’re factory-familiar with how each brand wears and where its weak points show up first. That means we diagnose brand-specific problems instead of guessing, and we can advise on panel matching if your door’s model is still in production.
Yes, we offer emergency garage door service for situations that compromise your home’s security or block access, like a door stuck open, a snapped spring or a car trapped inside. Call (844) 681-5326 and we’ll get you a realistic arrival window. If the door won’t close, avoid forcing it, since a door under failed spring tension can come down hard.
We back our repairs with a satisfaction guarantee and stand behind the work we do. Warranty terms depend on the part and the repair, so we explain exactly what’s covered before you approve the work. If something we fixed acts up again, call us and we’ll take a look.
Clear the floor in front of and under the door, and move cars out of the garage bay if you can. Note what the door is doing – when it started, whether it makes a noise, and whether the opener light flashes – since those details speed up the diagnosis. If you have the door or opener model number handy, that helps too, but it’s not required.
Schedule Your Garage Door Repair Service in Alexandria Today
A door that won’t open or close is a security problem and a blocked day, and the longer it sits, the more likely a small failure turns into a bigger repair. From the opener to the panel to the spring, we fix your existing door right before anyone suggests replacing it. Call Alexandria Garage Door Repair Co at (844) 681-5326 for a free, no-obligation estimate. Same-day service is available when you need it. For the full range of what we handle, start at Alexandria Garage Door Repair Co.
Written by the team at Alexandria Garage Door Repair Co.